Panasonic Laptop Docking Station 71600272 User Manual

INSTALLATION INSTRUCTIONS  
Product  
Revision  
Form  
INST-492  
7160-0272, 7160-0273  
Rev. B  
Universal Display Mount  
Printing Spec: PS-001  
The Universal Display Mount attaches directly to a Center Upper Pole or other mounting  
equipment containing a Gamber-Johnson swivel pattern cutout. It can also mount to an  
In-Dash bracket (optional). It will provide swivel, tilt and height adjustment to a variety  
of display solutions. Optional keyboard trays provides lockable stowage for keyboards.  
With optional adapter plates the Universal Display Mount accepts:  
- 75mm Vesa  
- 100mm Vesa  
- Gamber Johnson 4.09"X2.00" Accessories  
- Motorola MW800/MW810  
- Panasonic PDRC  
- Panasonic CF-19 on Gamber-Johnson dock  
Installation:  
1. For installation on an In-Dash bracket, please refere to the installation instructions  
provided with the In-Dash kit.  
2. To mount, place one Nylon Bearing (Item 3) on the mounting surface (DS-Upper, Center  
Upper, MCS, etc.).  
3. Set the Universal Display Mount (Item 1) on top of Nylon Bearing (Item 3) and insert  
three (3) .25-20 X 1.00 Carriage Bolts (Item 2) thru square holes in the mount, the Nylon  
Bearing and the mounting surface.  
4. On the underside of the mounting surface, install the other Nylon Bearing (Item 3), then  
the Backup Plate (Item 4).  
(Note: For proper swivel motion ensure parts are installed in the correct order,  
preventing metal to metal contact.  
5. Install the three .25 Flat Washers (Item 5) and .25-20 Lock Nuts (Item 6).  
6. Tighten the Lock Nuts (Item 6) as required to adjust the amount of resistance in the swivel  
motion.  
Product Mounting Disclaimer  
Gamber-Johnson is not liable under any theoryof contract or tort law for any loss, damage, personal injury, special, incidental or consequential damagesfor personal injury orother damage  
of any nature arising directly or indirectly asa result of the improper installation or use of its products in vehicleor any other application. In order to safely install and use Gamber-Johnson  
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is  
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications  
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.  
© copyright 2010 Gamber-Johnson, LLC  
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868  
1/2  
 

Miele Dishwasher G 1202 User Manual
Miele Ventilation Hood DA 6520 W User Manual
MTD Snow Blower 769 01283C User Manual
NEC Car Video System S521 User Manual
Nortel Networks Network Router WAG54G User Manual
Optoma Technology Projector DS216 User Manual
Oricom Baby Monitor 510 User Manual
Panasonic Air Conditioner CS PC18JKF User Manual
Panasonic Laptop 5741 User Manual
Patton electronic Network Card 1170M SERIES User Manual