Omega Vehicle Security Thermometer HH804W User Manual

INTRODUCTION  
FEDERAL COMMUNICATIONS  
COMMISSION  
This instrument is a 4½ digit, compact-sized portable  
digital thermometer designed to use external 100Plati-  
num RTD as temperature sensor. Temperature indication  
follows Reference Temperature/Resistance Tables (Pt385  
for European Curve, Alpha=.00385. Pt3926 for American  
Curve, Alpha=.003926. Pt3916 for Japan Curve, Al-  
pha=.003916.)  
OMEGAnet® On-Line Service  
omega.com  
Internet e-mail  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two condi-  
tions:(1) this device may not cause harmful interfer-  
ence, and (2) this device must accept any interference  
received, including interference that may cause unde-  
sired operation.  
HH804W  
WIRELESS DUAL INPUT RTD  
DIGITAL THERMOMETER  
Servicing North America:  
One Omega Drive, Box 4047  
Stamford, CT 06907-0047  
U.S.A:  
ISO 9001 Tel: (203) 359-1660  
FAX: (203) 359-7700  
M4552/0707  
Shop online at: omega.com e-mail: [email protected]  
For latest product manuals: omegamanual.info  
INSTRUCTION  
SHEET  
Certified e-mail: [email protected]  
SAFETY INFORMATION  
It is recommended that you read the safety and opera-  
tion instructions before using the thermometer.  
NOTE  
Canada:  
976 Bergar  
Laval (Quebec) H7L 5A1, Canada  
This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection. This equipment gener-  
ates, uses and can radiated radio frequency energy and,  
if not installed and used in accordance with the in-  
structions, may cause harmful interference to radio  
communications. However, there is no guarantee that  
interference will not occur in a particular installation If  
this equipment does cause harmful interference to ra-  
dio or television reception, which can be determined  
by turning the equipment off and on, the user is en-  
couraged to try to correct the interference by one or  
more of the following measures:  
Tel: (514) 856-6928  
FAX: (514) 856-6886  
WARNING  
To avoid electrical shock, do not use this instrument  
when working voltages at the measurement surface  
over 24V AC or DC.  
For immediate technical or application assistance:  
U.S.A  
and  
Canada:  
Sales Service: 1-800-826-6342/1-800-TC-OMEGA®  
Customer Service: 1-800-622-2378/1-800-622-BEST®  
Engineering Service: 1-800-872-9436/1-800-USA-WHEN®  
TELEX: 996404 EASYLINK: 62968934 CABLE: OMEGA  
WARNING  
To avoid damage or burns, do not make temperature  
measurement in microwave ovens.  
Mexico:  
En Espanol: (001) 203-359-7803  
FAX: (001) 203-359-7807 [email protected]  
Servicing Europe:  
Benelux: Postbus 8034, 1180 LAAmstelveen, The Netherlands  
Tel: +31 (0)20 3472121  
Toll Free in Benelux: 0800 0993344  
FAX: +31 (0)20 6434643  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and  
receiver.  
Czech  
Frystatska 184, 733 01 Karviná, Czech Republic  
Republic: Tel: +420 (0)59 6311899 FAX: +420 (0)59 6311114  
Toll Free: 0800-1-66342 e-mail: [email protected]  
- Connect the equipment into an outlet on a circuit dif-  
ferent from that to which the receiver is connected.  
- Consult the dealer or an experienced radio/TV tech-  
nician for help.  
France:  
11, rue Jacques Cartier, 78280 Guyancourt, France  
Tel: +33 (0)1 61 37 2900 FAX: +33 (0)1 30 57 5427  
Toll Free in France: 0800 466 342  
Shielded interface cables must be used in order to  
comply with emission limits.  
Changes or modifications not expressly approved by  
the party responsible for compliance could void the  
user‘s authority to operate the equipment.  
Germany/ Daimlerstrasse 26, D-75392 Deckenpfronn, Germany  
Austria:  
Tel: + 49 (0)7056 9398-0 FAX: +49 (0)7056 9398-29  
Toll Free in Germany: 0800 639 7678  
United  
One Omega Drive, River Bend Technology Centre  
Kingdom: Northbank, Irlam, Manchester  
ISO 9002 M44 5BD United Kingdom  
WIRELESS NOTE  
Wireless receiver must keep a distance at least 40cm  
from the meter and meter to meter distance  
must be at least 30cm.  
Certified Tel: +44 (0)161 777 6611 FAX: +44 (0)161 777 6622  
Toll Free in United Kingdom: 0800-488-488  
It is the policy of OMEGA Engineering, Inc. to comply with all  
worldwide safety and EMC/EMI regulations that apply. OMEGA  
is constantly pursuing certification of its products to the  
European New Approach Directives. OMEGA will add the CE  
mark to every appropriate device upon certification.  
The information contained in this document is believed to be  
correct, but OMEGA accepts no liability for any errors it  
contains, and reserves the right to alter specifications without  
notice.  
WARNING: These products are not designed for use in, and  
should not be used for, human applications.  
 
WARRANTY / DISCLAIMER  
TEMPERATURE  
RTD PROBE CONNECTION  
Where Do I Find Everything I Need for  
Process Measurement  
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in  
materials and workmanship for a period of 13 months from date of purchase.  
OMEGA’s WARRANTY adds an additional one (1) month grace period to the  
normal one (1) year product warranty to cover handling and shipping time.  
This ensures that OMEGA’s customers receive maximum coverage on each  
product.  
Thermocouple, RTD & Thermistor Probes,  
Connectors, Panels & Assemblies  
Wire: Thermocouple, RTD & Thermistor  
Calibrators & Ice Point References  
Recorders, Controllers & Process Monitors  
Infrared Pyrometers  
and Control?  
If the unit malfunctions, it must be returned to the factory for evaluation.  
OMEGA’s Customer Service Department will issue an Authorized Return  
(AR) number immediately upon phone or written request. Upon examination  
by OMEGA, if the unit is found to be defective, it will be repaired or replaced  
at no charge. OMEGA’s WARRANTY does not apply to defects resulting  
from any action of the purchaser, including but not limited to mishandling,  
improper interfacing, operation outside of design limits, improper repair, or  
unauthorized modification. This WARRANTY is VOID if the unit shows  
evidence of having been tampered with or shows evidence of having been  
damaged as a result of excessive corrosion; or current, heat, moisture or  
vibration; improper specification; misapplication; misuse or other operating  
conditions outside of OMEGA’s control. Components which wear is not  
warranted, include but are not limited to contact points, fuses, and triacs.  
OMEGA…Of Course!  
Shop online at omega.com  
PRESSURE, STRAIN AND FORCE  
Transducers & Strain Gages  
Load Cells & Pressure Gages  
Displacement Transducers  
TEMPERATURE VSRESISTANCE TABLE (ITS90)  
°C  
Pt385  
Pt3926  
16.996Ω  
59.479Ω  
100.000Ω  
139.272Ω  
177.362Ω  
214.275Ω  
250.018Ω  
284.591Ω  
317.994Ω  
-
Pt3916  
17.057Ω  
59.565Ω  
100.000Ω  
139.171Ω  
177.155Ω  
213.957Ω  
249.584Ω  
284.036Ω  
317.313Ω  
-
-200°C  
-100°C  
0°C  
18.521Ω  
60.256Ω  
100.000Ω  
138.505Ω  
175.856Ω  
212.052Ω  
247.092Ω  
280.977Ω  
313.708Ω  
345.280Ω  
375.700Ω  
Instrumentation & Accessories  
FLOW/LEVEL  
Rotameters, Gas Mass Flowmeters & Flow  
Computers  
Air Velocity Indicators  
Turbine/Paddlewheel Systems  
Totalizers & Batch Controllers  
100°C  
200°C  
300°C  
400°C  
500°C  
600°C  
700°C  
800°C  
OMEGA is pleased to offer suggestions on the use of its various  
products. However, OMEGA neither assumes responsibility for any  
omissions or errors nor assumes liability for any damages that result  
from the use of its products in accordance with information provided  
by OMEGA, either verbal or written. OMEGA warrants only that the  
parts manufactured by it will be as specified and free of defects.  
OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF  
ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, EXCEPT THAT OF  
TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE  
ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies  
of purchaser set forth herein are exclusive, and the total liability of  
OMEGA with respect to this order, whether based on contract, warranty,  
negligence, indemnification, strict liability or otherwise, shall not  
exceed the purchase price of the component upon which liability is  
based. In no event shall OMEGA be liable for consequential, incidental  
or special damages.  
pH/CONDUCTIVITY  
pH Electrodes, Testers & Accessories  
Benchtop/Laboratory Meters  
Controllers, Calibrators, Simulators & Pumps  
Industrial pH & Conductivity Equipment  
-
-
OPERATOR MAINTENANCE  
WARNING  
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor  
shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used  
in or with any nuclear installation or activity; or (2) in medical applications or  
used on humans. Should any Product(s) be used in or with any nuclear  
installation or activity, medical application, used on humans, or misused in  
any way, OMEGA assumes no responsibility as set forth in our basic  
DISCLAIMER language, and, additionally, purchaser will  
indemnify OMEGA and hold OMEGA harmless from any liability or damage  
whatsoever arising out of the use of the Product(s) in such a manner.  
To avoid possible electrical shock, disconnect the  
thermocouple connectors from the thermometer before  
removing the cover.  
DATA ACQUISITION  
Data Acquisition & Engineering Software  
CommunicationsBased Acquisition Systems  
Plugin Cards for Apple, IBM & Compatibles  
Datalogging Systems  
Battery Replacement  
1. Power is supplied by 4pcs 1.5V (AAA SIZE) UM-4  
R03.  
WARRANTY  
/
Recorders, Printers & Plotters  
2. The “ ” appears on the LCD display when replace-  
ment is needed. To replace battery remove screw from  
back of meter and lift off the battery cover.  
3. Remove the battery from battery contacts and replace.  
4. When not in use for long periods remove battery.  
5. Do not store in locations with high temperatures, or  
high humidity.  
HEATERS  
RETURN REQUESTS / INQUIRIES  
Heating Cable  
Direct all warranty and repair requests / inquiries to the OMEGA Customer  
Service Department. BEFORE RETURNING ANY PRODUCT(S) TO  
OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR)  
NUMBER FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN  
ORDER TO AVOID PROCESSING DELAYS). The assigned AR number  
should then be marked on the outside of the return package and on any  
correspondence.  
Cartridge & Strip Heaters  
Immersion & Band Heaters  
Flexible Heaters  
Laboratory Heaters  
The purchaser is responsible for shipping charges, freight, insurance and  
proper packaging to prevent breakage in transit.  
ENVIRONMENTAL  
Cleaning  
FOR WARRANTY RETURNS,  
please have the following  
information available BEFORE  
contacting OMEGA:  
1. Purchase Order number under  
which the product was  
FOR NON-WARRANTY  
MONITORING AND CONTROL  
Metering & Control Instrumentation  
Refractometers  
Periodically wipe the case with a damp cloth and deter-  
gent, do not use abrasives or solvents.  
REPAIRS, consult OMEGA for  
current repair charges. Have the  
following information available  
BEFORE contacting OMEGA:  
1. Purchase Order number to cover  
the COST of the repair,  
Pumps & Tubing  
*Software Operation manual is on the Software disk.  
Air, Soil & Water Monitors  
Industrial Water & Wastewater Treatment  
pH, Conductivity & Dissolved Oxygen  
Instruments  
PURCHASED,  
2. Model and serial number of the  
product under warranty, and  
2. Model and serial number of the  
product, and  
3. Repair instructions and/or specific 3. Repair instructions and/or specific  
problems relative to the product. problems relative to the product.  
OMEGA’s policy is to make running changes, not model changes, whenever  
an improvement is possible. This affords our customers the latest in tech-  
nology and engineering.  
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.  
© Copyright 2007 OMEGA ENGINEERING, INC. All rights reserved. This  
document may not be copied, photocopied, reproduced, translated, or  
reduced to any electronic medium or machine-readable form, in whole or in  
part, without the prior written consent of OMEGA ENGINEERING, INC.  
 

Miele Washer W828 User Manual
Milwaukee Vacuum Cleaner 8911 User Manual
MTD Trimmer MT700 User Manual
Murray Lawn Mower 425306x48A User Manual
NEC Car Video System LCD4020 User Manual
NEC Projector VT660 VT560 VT460 User Manual
NETGEAR Network Hardware XAVB5101 100PAS User Manual
Oster Mixer 151247 User Manual
Paradyne Network Hardware 8620 User Manual
Patriot Products Chipper 10F CSV User Manual