KitchenAid Garbage Disposal KCDS100T User Manual

Food-Waste Disposer

PRODUCT MODEL NUMBER

OVERALL DIMENSIONS

KCDS100T

Electrical: This disposer is intended to be

direct-wired to the electrical supply. If junction

box is used, connect the junction box to the switch

on a separate 15- or 20-amp 115 Volt circuit with

the appropriate cable. (Use 14 gauge wire with

15-amp circuit, and 12 gauge wire with 20-amp

circuit.) This disposer requires a switch marked

"Off" position (wired to disconnect all ungrounded

supply conductors) installed within sight of the

disposer sink opening. (1 hp minimum rating.)

A. 9" (22.9 cm)

B. 12-3/4" (30.5 cm)

C. 5-3/4" (14.6 cm)

D. 4" (10.2 cm)

E. 6-11/16" (17.0 cm)

F. Dishwasher drain connection

Installations on thicker sinks (such as solid surface, porcelain, or cast iron) may

require the use of alternate parts. Measure existing mounting assembly as shown in

figure A or measure sink thickness as shown in figure B, to determine whether an

extended sink flange must be ordered.

7/8”

3/4”

Because Whirlpool Corporation policy includes a continuous commitment to improve

our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Instructions packed with product. Specifications subject to change without notice.

Ref. W10118055

10-15-07